Hardware Clocks

PrintReader for Tranz Clocks

While our Tranz clocks are designed to take a PIN or swipe card entry for collecting time, we do provide external PrintReaders that can be used to require a fingerprint when employees clock in and out. This art...

Read Article

Z12 / Z14 Keypad Replacement

If a keypad for FlexClocks Z12 and Z14 become worn, it is possible to replace the keypad. Contact support regarding a new keypad and follow these steps to replace it. Needed Tools Flathead screwdriver Ph...

Read Article

Change Magnetic Track for Cards on Tranz 330 / 380 Clocks

Reprogram the clock, but substitute "7472" in the step where you put "747". When it's done, press FUNC 1, and at the menu, type 87225 (spells TRACK). This will let you pick track 1, 2, or 3.

Read Article

Z Clock Dimensions

This lists the dimensions+ of each of our Z-Clocks (Z11, Z12, Z18, Z23/33 and Z24/34): L = Length W = Width D = Depth Z11: L: 5.25 in W: 7.25 in D: 2.25 in Z12: L: 5.75 in W: 6.75 in D: 2 in Z18: L: 5.7...

Read Article

Incorrect Power Adapter/Cord/Cable

Beyond the usual things like the power adapter/cord being bad or the outlet the clock is plugged into being bad one of the other issues that can occur especially as clients are transitioning to a more featured ...

Read Article

Tranz 330/380 Wall Mounting Template

Below is a .pdf copy of the template you can print out and use for installing the Tranz 380 timeclock.

Read Article

GT-400 Battery Backup

The GT-400 Hand Punch clock can be hooked up to a battery backup. While SwipeClock does not offer this backup through our product page, we can purchase on behalf of the partner. Please submit a support ticket ...

Read Article