Hardware Clocks

Z Clock / Ethernet Clock Setup

The Z Series FlexClocks are our real-time, Ethernet clocks. They transmit punches to our servers via a TCP/IP network and will work at any site with a wired network. While these clocks are fairly simple to inst...

Read Article

Adding Clocks

In order for a physical clock to connect with SwipeClock (excluding TimeWorksTouch), the serial number of the clock needs to be assigned to the account. Adding clocks to the client's account is done from the ...

Read Article

Biometric Clocks - Enrolling Prints

The following article pertains to our Ethernet based biometric clocks. It includes the following topics. Enrolling Prints How To Clock In and Out Disabling or Enabling the PIN Requirement or Auto Mode ...

Read Article

Trusted PINs

The Trusted PIN Number feature will allow employees to use a PIN number on a Z-clock or Vx Clock, even if the clock is set to never allow a PIN only punch. This feature provides the supervisor with the ability ...

Read Article

Biometrics Maintenance - TWP

The Biometrics Maintenance page found by going to Maintenance Menu > Biometric Maintenance. It is designed for accounts that are using fingerprint or hand geometry clocks. It allows one to manage and/or view...

Read Article

Z Series FlexClock and GT 400 - Setup, Troubleshooting and FAQ

This comprehensive on our Ethernet based clocks contains information on setup, configuration, features and troubleshooting. If you are setting up a clock, see Z Clock / Ethernet Clock Setup for a concise guide ...

Read Article

Print Downloading on Ethernet Clocks

When a print is enrolled on our biometric clocks, the clock stores the print as a print template. This print template will be uploaded to our servers as a backup, but it can also be downloaded by other clocks s...

Read Article

Clock Manuals

This article contains downloadable clock manuals.

Read Article

Unmatched Punches

Unmatched Punches are punches that have been made at a physical clock, but, due to either an incorrect entry by the employee or a missing card number in Employee Setup, the punch cannot be matched to a time car...

Read Article

146 Error / 148 Error

Sometimes a clock may display the error "CANNOT CONNECT 146" or a "CANNOT CONNECT 148" when initially set up. There is no problem with the clock, this is a network issue. What this means is that the clock CAN ...

Read Article