TWP Partner Knowledge Base

Clocks - Ethernet

  • Z Clock / Ethernet Clock Setup

    The Z Series FlexClocks are our real-time, Ethernet clocks. They transmit punches to our servers via a TCP/IP ...

    Jan 31, 2017 04:59PM MST
  • Setting Static IP / DHCP on Clock

    Our Ethernet clocks (Z clocks and GT-400), like any network device, require an IP address to operate on your c...

    Apr 20, 2017 05:00PM MDT
  • Unknown Serial Error

    If an Ethernet clock displays Unknown Serial, follow these steps: Ensure the serial number of the clock mat...

    Jan 31, 2018 04:10PM MST
  • 146 Error / 148 Error

    Sometimes a clock may display the error "CANNOT CONNECT 146" or a "CANNOT CONNECT 148" when initially set up. ...

    Apr 20, 2017 05:00PM MDT
  • Z Series FlexClock and GT 400 - Setup, Troubleshooting and FAQ

    This comprehensive on our Ethernet based clocks contains information on setup, configuration, features and tro...

    Jan 26, 2018 08:14AM MST
  • Connection Timed Out Error

    Start with these basic troubleshooting steps: Make sure the cables to the clock and the wall outlet are sec...

    Apr 20, 2017 05:00PM MDT
  • No ENQ From Host Error

    This can happen due to Captive Paywalls / Firewalls. If your network requires you to click an "I Agree" button...

    Apr 20, 2017 05:00PM MDT
  • Failed Socket 0 Connection to the Router Error

    This error can occur when 9 is pressed to transmit the clock. If you are getting a socket message, please powe...

    Apr 20, 2017 05:00PM MDT
  • Z18 Product Overview

    The Z18 has a built-in proximity card reader and it is designed to be wall-mounted, with all cables buried in ...

    Jan 31, 2017 05:02PM MST
  • GT-400 Hand Punch

    The GT-400 uses a hand geometry reader in the same manner as our fingerprint clocks. The main benefit of hand ...

    Jan 31, 2017 05:09PM MST
  • Get More in Support Center

    Swipeclock partners can submit cases to technical support and view additional articles in Support Center.

    Your accountant login to TimeWorksPlus is required to access Support Center.
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found