Manual Clock Settings For Biometric Clocks

Biometric clocks can allow an employee to clock in without a fingerprint if the employee has not had a print enrolled. This can often result in many Unprocessed/Unmatched punches as employees try to clock in before they have been enrolled or they enter the wrong PIN number before placing their finger on the prism. However, this can be changed so that employees can only clock in with a print and any PIN only punch will be rejected.
 

TimeWorksPlus

  1. After selecting the client from you client list, go to Accountant Menu and in  Client Configuration and select the Account Configuration tab.
  2. Locate theKeypad Entry Restrictions in TimeWorksPlus and change to Never Allowed if you do not want employees to clock in/out without a print. If you would like the employees to clock in/out with a PIN number only, you can set this to Any Number Up to 9 Digits Allowed.

TimeWorks

The Manual Clock settings​ are found in the Miscellaneous Settings of the Accountant Menu and this article will instruct you as to how the options can be changed.
  1. After selecting the client from you client list, go to Accountant Menu and select Miscellaneous Settings
  2. Locate theManual Clock settings and change to Never Allowed if you do not want employees to clock in/out without a print. If you would like the employees to clock in/out with a PIN number only, you can set this to Any Number Up to 9 Digits Allowed.
  3. Save your changes at the bottom of the page.

Did you find this article helpful?